Docs › fixtures-and-presets
Fixtures
Setting up the lighting fixtures in your room.
Fixtures
A fixture in CueProX is a lighting unit you've named and registered for the room — a moving head, a PAR, a wash, a strobe, whatever your rig contains. Once set up, each fixture can be controlled per cue: turned on or off, given a specific color.
Where to manage: room config sidebar → Fixtures tab.
Note
Adding a fixture
Click + Add fixture to expand the add form. Choose a type first, then name the fixture.
Fixture types
The type grid shows 12 built-in categories. Pick the closest match to the physical unit:
| Type | What it represents |
|---|---|
| Moving Head | Pan/tilt moving fixture |
| PAR | Fixed wash PAR can or similar |
| Bar | LED bar or strip |
| Blinder | Audience-facing blinder unit |
| Strobe | Strobe or flash unit |
| Wash | Flood or area wash fixture |
| Spot | Hard-edge profile or ellipsoidal |
| Beam | Beam fixture or sharpy-style |
| Fresnel | Fresnel soft-edge fixture |
| LED Panel | Flat LED panel or matrix |
| Smoke | Smoke or fog machine |
| Haze | Haze machine |
Select None if nothing fits — the fixture will use a generic icon.
Name
Name the fixture something your lighting operator will recognize at a glance — "FOH Left", "Stage Wash 1", "Hazer", "Altar Spot". Names show up in the cue form and on the Lights output, so clarity matters more than brevity.
Click Add to save. The fixture appears in the list immediately.
Editing a fixture
Click the icon button on the left side of a fixture row to open the inline edit form. The form shows both the name field and the type picker at the same time — update either or both, then click Save. Click Cancel to discard changes.
Reordering fixtures
Each fixture row has up and down arrow buttons to the left of the icon. Click them to move the fixture one position at a time. The order here is the order fixtures appear on the Lights output during a show — arrange them to match how your lighting operator thinks about the rig.
Removing a fixture
Click the trash icon on a fixture row. A confirmation prompt appears:
"Remove {fixture name}? This will also clear any per-cue settings for this fixture."
Confirm with Remove to delete it. The fixture is removed from the room and all per-cue color and enabled/disabled settings tied to it are cleared. This can't be undone.
Permissions
Owner, Director, Associate Director, and the Lights team lead can manage the Fixtures tab. Other roles don't see it.
Plan limits
Each plan has a maximum fixture count. If you reach the limit, the + Add fixture button returns an error prompting you to upgrade.